家装防水
单组份JS聚合物水泥基防水涂料Single-Component JS Polymer Cement Waterproof Coating

嘉佰丽单组分JS聚合物水泥基防水涂料是高分子聚合物丙烯酸酯类防水涂料,属于改进型JS复合防水涂料液料。它主要作为单组分防水涂料使用,也可以与普通硅酸盐水泥复合作为双组分使用,还可以加2~3倍的水稀释后配制聚合物防水砂浆。

Single-component JS polymer cement waterproof coating is single-component water-based polymer cement slurry. It can be constructed after stirring directly from the bucket without extra cement. The cured membrane balances rigidity and flexibility, with strong adhesion, good impermeability and crack resistance. It can be applied on damp substrates, and tiles can be directly laid on the waterproof film. Widely used for waterproofing and moisture-proofing of kitchens, bathrooms, balconies, basements and exterior walls for residential and commercial projects.

分享:
在线资讯

适用范围:

屋面、外墙、卫生间、浴室、地下室、水池、电缆地沟、窨井等。


产品特点:

1.性能稳定,耐老化性优良,防水寿命长,施工方便,操作简单,可在无明水的潮湿基面直接施工。

2.粘结力强,材料与水泥基面粘结强度可达0.5MPa 以上。

3.材料弹性好,延伸率可达350%,抗裂性、抗冻性和低温柔性优良,成膜效果好。


施工特点:

1.基面应牢固、无松动、无起砂、无明水和裂缝表面应平整光滑。

2.充份清理干净基面,洒水润湿基面,至基面无明水施工。

3.使用时添加水泥按(浆料:水泥=1:0.8~1)比例搅拌,操作过程中应保持间断性搅拌,以防止沉淀。

4.首先对阴阳角、接头、分格缝以及不同材质交接处等特殊节点部位进行堵漏密封处理,然后用毛刷蘸取浆料对节点部位厚涂一遍。

5.第一层完全干透后(约2~4小时),再喷涂第二层。第二层的喷涂方向应与第一层的喷涂方向相垂直。


注意事项:

施工温度应保持在5℃~40℃之间。

5kg/10kg/20kg/桶

给我们留言
LEAVE A MESSAGE